SKU | B2 | U2 | |
Receiver | 3.5mm | USB-C / Lightning | |
Transmitter | with 2 Mics | with 2 Mics | |
Color | Black | Black |
Dimensions | 47*47*12.5 mm | 47*47*12.5 mm | |
Weight | 30 g | 30 g | |
Transmission | 2.4 GHz Frequency Band | 2.4 GHz Frequency Band | |
Polar Pattern | Ominidirectional | Ominidirectional | |
Transmission Range | 100 m | 100 m | |
Sampling Rate / Depth | 48Khz / 24-bit | 48Khz / 24-bit | |
Frequency Response | 20 Hz - 20 KHz | 20 Hz - 20 KHz | |
SNR | > 80 dB | > 80 dB | |
SPL | 110 dB | 110 dB | |
Noise Reduction | Activated with a press on the NR button | Activated with a press on the NR button | |
Gain Control | 24 levels of gain control | 24 levels of gain control | |
Microphone | Built-In diaphragm | Built-In diaphragm | |
Built-In Memory | 8 GB | 8 GB | |
Transmission Latency | 20-30 ms | 20-30 ms | |
Clip | Magnetic | Magnetic | |
Human-Machine Interaction | Touchscreen | Touchscreen | |
Audio Input | Built-In diaphragm / Line-In Lavalier | Built-In diaphragm / Line-In Lavalier | |
Power Supply | Built-In Lithium-ion Battery / External Power Supply |
Built-In Lithium-ion Battery / External Power Supply |
|
Battery Life | 5 hours with onboard REC activated 8 hours with onboard REC deactivated |
5 hours with onboard REC activated 8 hours with onboard REC deactivated |
|
Charging Port | Charging Pins | Charging Pins |
Dimensions | 56.6 * 56.6 * 25.2 mm | 57.45 * 22.88 * 8 mm | |
Weight | 70 g | 11.3 g | |
Audio Output | Digital Output and Analog Output | Digital Output Only | |
Audio Output Modes | Mono / Stereo / Safety | Mono / Stereo / Safety | |
Playback while Connected to Mobile Devices | - | √ | |
Monitoring | √ | √ | |
Gain Control | 24 levels of gain control | 24 levels of gain control | |
Human-machine Interaction | Touch Control | Touch Control | |
边冲边用 | - | √ | |
Power Supply | Built-In Lithium Battery or Charging Port | Charging Port Only | |
Battery Life | 24h | × | |
Charging Port | USB-C | USB-C / Lightning | |
3.5mm TRS | √ | × | |
USB-C | √ | √ | |
Lightning | × | √ |
Dimensions | 56.6 × 56.6 × 25.2 mm | 334.38 × 138.5 × 66.58 mm | |
Weight | 70 g | 193.8 g | |
Charging Cycles for TX and RX | 1 Cycle (for only 1 TX) | Appox. 2 Cycles | |
Operating Time for TX and RX | 36 hours | 50 hours | |
Battery Capacity | 1600 mAh | 3000 mAh |
Step 1: Power on the receiver and transmitter and keep them connected.
Step 2: Turn on Bluetooth and ensure that your phone is connected to the internet (Wi-Fi / 4G / 5G).
Step 3: Open the Saramonic app: Tap the ""+"" icon in the upper left corner.
Step 4: Select the Bluetooth device named ""BlinkMe"" to connect successfully.
* Avoid speaking directly into the microphone to prevent breath "pops".
* If you speak loudly, clip the microphone lower.
* If you speak softly, position the microphone closer to your mouth.
* Adjust the transmitter or receiver gain as needed.
With onboard recording off, the transmitter lasts about 8 hours on a full charge. With it on, battery life is about 5 hours.
Step 1: Press the NR button on the side of the transmitter to turn noise cancellation on or off.
Step 2: When enabled, the green indicator light on the left will stay on.
Step 3: Noise cancellation will automatically reduce ambient noise.