Compatible with cameras, smartphones (USB-C, Lightning), computers, and some action cameras (DJI Action 4, DJI Osmo Pocket 3).
Step1: Download the Saramonic App.
Step2: Power on the transmitter and receiver.
Step3: Connect the receiver to your phone via the app.
Step4: Check the firmware status in the control interface and upgrade.
They are pre-paired. To re-pair:
Step1: Place them in the charging case.
Step2: Turn on the receiver, go to the menu, and select "Pairing".
Step3: Long press the power button on the transmitter for 5 seconds until the blue light flashes. A steady blue light means pairing is successful.
Yes, it has 8 GB storage that auto-overwrites the oldest audio.
Press the power button briefly until the lock icon appears. To unlock, press the power button again.
Supported frame rates include:
23.98 fps
24 fps
25 fps
29.97 DF (Drop Frame)
29.97 fps
30 fps
Choose the closest match (e.g., for 47.96 fps, select 23.98 fps).
It allows clearer sound with less noise. Set it to low gain mode to handle sound levels up to 130 dB, preventing distortion for louder audio while keeping levels above 125 dB in check.
It automatically starts recording when powered on to prevent forgetting to record.
To reduce file size and speed up exports.
S: Stereo mode – each transmitter records on a separate channel.
M: Mono mode – both transmitters combine into one output.
Ms: Mono with safety track – records a backup at -6 dB to prevent distortion. Requires post-processing to separate tracks.
| Receiver | 3.5 mm / USB-C / Lightning |
| Transmitter | with 2 Mics (Optional with lavaliers) |
| Color | Black / White |
| Dimensions | 45.5 × 33.5 × 15 mm |
| Weight | 35 g |
| Sample Rate / Bit Depth | 48 kHz / 24-bit 48 kHz / 32-bit float (with onborad recording enabled) |
| Signal-to-noise Ratio | ＞90 dB |
| SPL | 130 dB |
| Output Mode | Mono / Stereo / Safety Track / Headset / Headphone |
| One-Click Noise Cancellation | ✔ |
| Noise Cancellation Mode | Adjustable in three levels via the app |
| Frequency Response | 20 Hz - 20 kHz |
| Latency | 300 m (with external antenna) 250 m (without external antenna) |
| Low Cut | 25 ms |
| Transmission Range | 150 Hz |
| Timecode | ✔ |
| Onboard Recording | 8 GB |
| Built-in Mic | Premium MEMS Mic |
| Battery Life | 6 hours |
| Clip | Metal / Non-removable / Non-rotatable |
| Display | × |
| Supports Mic in | ✔ |
| Windproof Capsule | × |
| Water Resistance | IPX5-rating |
| Power Supply | Built-in Lithium-ion Battery |
| Display | AMOLED |
| Real-time Monitoring | ✔ |
| Playback without Unplugging Receiver | ✔ |
| Gain Control | ✔ |
| Charging while Recording | ✔ |
| Supports Dual Device Output | ✔ |
| Adapter Design | Replaceable / Plug and Play / No Latch |
| 3.5 mm | ✔ (Female Connector) |
| USB-C | ✔ |
| Lightning | ✔ |
| Dimensions | 117 × 48.5 × 62.4 mm |
| Weight | 210.5 g |
| Charging Cycles (2 × TX + 1 × RX) | Approx. 2 Cycles |
| Operating Time (2 × TX + 1 × RX) | 24 hours |
| Battery Capacity | 2900 mAh |
